Wanted: Estes Scion

[Otimebomb]

Looking for an Estes Scion. Let me know if you have one to part with.

 

[K'Tesh]

Wanted... Scans of the Estes Scion (9712) instructions.

 

[BDB]

Looking for an Estes Scion. Let me know if you have one to part with.

I have a set of fins, if you want to scratch build the rest.

 

[rharshberger]

I have a set of fins, if you want to scratch build the rest.

With that set of fins, a Big Daddy nose cone, and a piece of T300 airframe tube (you need 32" of the 34" piece iirc) from as well as two CR52H300-W centering rings, and a short piece of T52H from Balsa Machining Service, you have what you need to clone a Leviathan or a Scion.
Nice but not necessary are an Estes or Aeropack motor retainer, 29mm motor block (limits motor length though).

 

[K'Tesh]

I have a set of fins, if you want to scratch build the rest.

I'll defer to Otimebomb... but if he doesn't want them... I'll take 'em. I even have a US address they can be sent to (eRockets in Dayton, Ohio).

 

[kuririn]

Wanted... Scans of the Estes Scion (9712) instructions.

K'Tesh,

I scanned the Scion instructions for you in pdf format but it's too big to upload here. PM me and let me know where to send it.

 

[Otimebomb]

You can take 'em

 

[K'Tesh]

K'Tesh,

I scanned the Scion instructions for you in pdf format but it's too big to upload here. PM me and let me know where to send it.

Thanks! I got 'em!

You can take 'em

Thanks!

 

[spdntckt]

You can take 'em

i have one in the attic somewhere.. i can look for it if you still want one.

 

[Otimebomb]

i have one in the attic somewhere.. i can look for it if you still want one.

That would be great.