Using two Altus metrum devices at once?

[Andrew_ASC]

Just playing around with electronics. So I configured the TeleGPS on 435.350 and Telemini on 434.550. Can only configure and monitor one device at a time per Base. Hoping the Telemini retains last programmed altimeter deploy settings while monitoring GPS. If anyone sees a fault in that logic speak up.

Interesting to note you can swap the channels on base to switch between monitoring one device or the other.

 

[Andrew_ASC]

It appears all of the telemetry files autosaved. Interesting.

 

[blackjack2564]

I've done it Andrew. Used the Telemega and tele GPS in same rocket.
However i did have 2 base units {teleBT] to track both simultaneously.
It did require 2 of us to do it.

It will work just fine with one base. i have tracked 4 rockets, [not mine] that way.
As long as standard frequencies are being used. You can program non-public ones only you can track also.

 

[Random Flying Object]

If you have room, try to vertically offset the TX antennas. It will keep your electronics happy.

+1 on blackjacks response.

I have also had luck with two TeleDongles on a single computer. Remember, both of those transmitters also have APRS if you have the ability to use that signal.