flipper
Member
- Joined
- Sep 19, 2004
- Messages
- 16
- Reaction score
- 0
Was curious if anyone uses a dremel rotary tool for any kind of finishing (especially to fins). Have some sloppy looking fillets (only on rocket build #2), and i was thinking of using my dremel and a rounded sanding bit to smooth them up. Would use very low speed, but worrying about the vibration loosening the glue bond.
Was also considering using it to round the fin edges as well.
If anyone is using one for this, or anything else, i would love to hear about it.
Ken
P.S. Building baby bertha and only using yellow wood glue as opposed to epoxy.
Thanks!!
Was also considering using it to round the fin edges as well.
If anyone is using one for this, or anything else, i would love to hear about it.
Ken
P.S. Building baby bertha and only using yellow wood glue as opposed to epoxy.
Thanks!!