gpoehlein
Well-Known Member
- Joined
- Jan 18, 2009
- Messages
- 3,565
- Reaction score
- 22
Has anyone upscaled the Taz to 24mm (D12) motor size? I've successfully upscaled it to 18mm and flown it on B motors, but I was wondering if anyone ever tried it on a D. I did find that, when flying with a B, you need to use a B6-0 or else risk the thing "ejecting" on the ground (not that it ejects the motor, but if you are flying in a NAR contest, the ejection charge can't go off after it hits the ground or you are DQed).
My upscale version (on the drawing board - haven't built it yet) has 5-1/2" BT-50 tube with a BNC-50 nose cone, and the rotors are 1-1/4" wide by 8" long. I figure to use 1/8" balsa.
My upscale version (on the drawing board - haven't built it yet) has 5-1/2" BT-50 tube with a BNC-50 nose cone, and the rotors are 1-1/4" wide by 8" long. I figure to use 1/8" balsa.