Upscale Der Red Max, Goblin and Mosquito Fin router templates

The Rocketry Forum

Help Support The Rocketry Forum:

AHansom

Well-Known Member
Joined
Jan 22, 2009
Messages
868
Reaction score
90
Location
Santa Barbara, CA.
Anybody looking to do a 4" BT upscale? Ill send you all 3 guides if you promise to use them.. All you need is a router with a trim bit to make these work. All the templates are made with TTW tabs, the Der Red Max and Goblin fins are set up for a 54mm MM and the Mosquito tabs are for a 38mm MM. The rockets pictured have 3/16 fins with a layer of fiberglass on each side

IMG_4898.jpg

fintemplate.jpg

DSCN1335.jpg

IMG_0839.jpg

lam.jpg
 
Last edited:

dhbarr

Amateur Professional
Joined
Jan 30, 2016
Messages
7,276
Reaction score
1,709
I promise to use them! :)

Good excuse to buy some bluetube.
 

dhbarr

Amateur Professional
Joined
Jan 30, 2016
Messages
7,276
Reaction score
1,709
So I think these things should travel. After I've made my copy, Mendal gets the set ( my treat assuming it's not to Ulaanbaatar ). Pass 'em on!
 

Mendal

Well-Known Member
Joined
Feb 5, 2016
Messages
244
Reaction score
15
Sounds great, I would pass them on to the person after I am done with them!
 

Kruegon

Well-Known Member
Joined
May 21, 2014
Messages
1,885
Reaction score
4
I do love upscales. Mendal, if you do pass them on, I'd like to be considered. The only other option is sim them out and send off for a cnc order of them.
 

dhbarr

Amateur Professional
Joined
Jan 30, 2016
Messages
7,276
Reaction score
1,709
Got 'em today. It'll be a while before I can dupe 'em, but Mendal PM me your address anyhoo so we can keep 'em moving as soon as I finish :)
 
Top