Telemini dimensions

[TRFfan]

How long is the telemini's complete setup, including antenna and battery? Also how large does the sampling hole in the airframe have to be for it to measure altitude accurately?

 

[tim cubbedge]

Best bet is to contact Keith or Bob on their website. They usually respond pretty fast.

 

[TRFfan]

Ok thanks.

 

[plugger]

What model do you have? The v1 model is 0.17 inches shorter than the v3 model. Also, do you plan to "sandwich" the battery with the board or lay them lengthwise beside one another?

Also how large does the sampling hole in the airframe have to be for it to measure altitude accurately?

That's completely dependent on the volume of the space you're enclosing the TeleMini in.

 

[TRFfan]

What model do you have? The v1 model is 0.17 inches shorter than the v3 model. Also, do you plan to "sandwich" the battery with the board or lay them lengthwise beside one another?



That's completely dependent on the volume of the space you're enclosing the TeleMini in.

I'm enclosing it in the nose cone. I'll probably be using a V1 model and will sandwich the battery.

 

[watheyak]

The website says it's 1.7" x 0.5". Although it's not noted on that page, the antenna is 6.5" long. It needs to stay straight. 8.2" long total.

https://altusmetrum.org/TeleMini/

A 1/8" hole at the base of the nosecone should be all that's required for the static port.

 

[TRFfan]

The website says it's 1.7" x 0.5". Although it's not noted on that page, the antenna is 6.5" long. It needs to stay straight. 8.2" long total.

https://altusmetrum.org/TeleMini/

A 1/8" hole at the base of the nosecone should be all that's required for the static port.

Thanks!