STAINLESS STEEL M PAD

The Rocketry Forum

Help Support The Rocketry Forum:

exracer

Member
Joined
Dec 20, 2015
Messages
17
Reaction score
0
5' X 5' BASE STAINLESS STEEL PAD FULL TIG WELDED AND WILL NEVER RUST, EASY CLEAN WITH 10 RAIL IF YOU NEED THAT TOO. AS YOU CAN SEE IN THE PHOTOS IT TILTS DOWN WITH EASE FOR LOADING YOUR M MOTOR ROCKET. VERY EASY TO TEAR DOWN WITH ONLY A 3/4" WRENCH. TWO PLASTIC HANDLES THAT'S IT ALL OTHER COMPONETS ARE 100% STAINLESS STEEL. 1-1/2 SQUARE TUBING SETTING ON ADJUSTABLE HEIGHT PADS ON ENDS.

STAINLESS PAD.jpg

STAINLESS PAD 1.jpg

STAINLESS PAD 2.jpg

STAINLESS PAD 3.jpg

STAINLESS PAD 5.jpg
 

Thundercloud

Well-Known Member
Joined
Jul 7, 2017
Messages
192
Reaction score
29
I like your design, especially the way it pivots high, locks down low, and lowers a full 90 degrees for loading. Is there adjustable feet at the three corners?
 

DannyB

Lifetime Supporter
TRF Lifetime Supporter
Joined
Apr 26, 2017
Messages
348
Reaction score
0
Will you be at any big events for delivery? Where's you home club? I'm very interested in this. Thanks!
 
Top