Show us your 3D prints.

Discussion in 'Galleries / Photo & Video Tips' started by cwbullet, Oct 17, 2018.

Help Support The Rocketry Forum by donating:

  1. Oct 17, 2018 #1

    cwbullet

    cwbullet

    cwbullet

    Obsessed with Rocketry Staff Member Administrator TRF Lifetime Supporter Global Mod

    Joined:
    Jan 24, 2009
    Messages:
    20,768
    Likes Received:
    829
    Gender:
    Male
    Location:
    Glennville, GA
    Although Rocketry items are preferred, anything family safe is ok.

    Show us you 3D printed items!
     
  2. Oct 17, 2018 #2

    swatkat

    swatkat

    swatkat

    Well-Known Member

    Joined:
    Jun 25, 2014
    Messages:
    1,156
    Likes Received:
    76
    BIG nose cone. :)
     

    Attached Files:

  3. Oct 17, 2018 #3

    swatkat

    swatkat

    swatkat

    Well-Known Member

    Joined:
    Jun 25, 2014
    Messages:
    1,156
    Likes Received:
    76
    And a few of these helmet things. :)
     

    Attached Files:

  4. Oct 17, 2018 #4

    figNewtonSeconds

    figNewtonSeconds

    figNewtonSeconds

    Member

    Joined:
    Feb 12, 2014
    Messages:
    13
    Likes Received:
    0
    The Saturn V and Electron are 1/60, the rest are 1/100. Everything was printed as separate color pieces and then assembled, no painting.
     

    Attached Files:

  5. Oct 17, 2018 #5

    swatkat

    swatkat

    swatkat

    Well-Known Member

    Joined:
    Jun 25, 2014
    Messages:
    1,156
    Likes Received:
    76
    A few retaining rings :)
     

    Attached Files:

    FlyBy01 likes this.
  6. Oct 17, 2018 #6

    swatkat

    swatkat

    swatkat

    Well-Known Member

    Joined:
    Jun 25, 2014
    Messages:
    1,156
    Likes Received:
    76
    Closer view of a 54mm ring set.
     

    Attached Files:

  7. Oct 17, 2018 #7

    swatkat

    swatkat

    swatkat

    Well-Known Member

    Joined:
    Jun 25, 2014
    Messages:
    1,156
    Likes Received:
    76
    And the T3 tracker housing.
     

    Attached Files:

  8. Oct 17, 2018 #8

    swatkat

    swatkat

    swatkat

    Well-Known Member

    Joined:
    Jun 25, 2014
    Messages:
    1,156
    Likes Received:
    76
    3" nosecone
     

    Attached Files:

  9. Oct 17, 2018 #9

    swatkat

    swatkat

    swatkat

    Well-Known Member

    Joined:
    Jun 25, 2014
    Messages:
    1,156
    Likes Received:
    76
    And a bunch of other items. Per Amazon, I've used 41 reels of filament in the two years I've owned the printer. It's pretty much going 24/7. Longest single print was 348 hours.
     

    Attached Files:

  10. Oct 17, 2018 #10

    Leo

    Leo

    Leo

    Well-Known Member

    Joined:
    Aug 19, 2009
    Messages:
    1,726
    Likes Received:
    36
    Sounding rockets: Nike 10° Cone (left) and NASA Hawk (right)
     

    Attached Files:

  11. Oct 17, 2018 #11

    SaturnV_

    SaturnV_

    SaturnV_

    Member

    Joined:
    Apr 8, 2017
    Messages:
    24
    Likes Received:
    3
    My fin-o-cyl mandrel for 38mm grains
     

    Attached Files:

  12. Oct 17, 2018 #12

    neil_w

    neil_w

    neil_w

    Perpetually waiting for good painting weather TRF Supporter

    Joined:
    Jul 14, 2015
    Messages:
    4,981
    Likes Received:
    362
    Location:
    Northern NJ
    IRIS-T IR camera assembly, SLA-printed in black resin:
    Nose2-4.jpg
    All dolled up:
    Nose2-2.jpg
    And installed:
    Nose3-6.jpg
     
  13. Oct 18, 2018 #13

    cwbullet

    cwbullet

    cwbullet

    Obsessed with Rocketry Staff Member Administrator TRF Lifetime Supporter Global Mod

    Joined:
    Jan 24, 2009
    Messages:
    20,768
    Likes Received:
    829
    Gender:
    Male
    Location:
    Glennville, GA
    Here is a rocket I printed today. It is off Thingiverse.

    Sorry forgot the image upload_2018-10-17_19-37-20.png

    Foot note added: This is Ben Martin's 3D context entry.
     
    Last edited: Oct 18, 2018
    Ben Martin likes this.
  14. Oct 18, 2018 #14

    kavel_r

    kavel_r

    kavel_r

    Active Member

    Joined:
    Feb 1, 2018
    Messages:
    44
    Likes Received:
    0
    BT-70 nose cone with a screw-in altimeter holder
    [​IMG]
     
  15. Oct 18, 2018 #15

    Ben Martin

    Ben Martin

    Ben Martin

    Well-Known Member

    Joined:
    Sep 29, 2018
    Messages:
    490
    Likes Received:
    112
    Gender:
    Male
    Location:
    Houston
    Hey, that's my project! Thanks for doing my hard work some justice with a clean print. Let me know how the construction goes.
     
  16. Oct 18, 2018 #16

    cwbullet

    cwbullet

    cwbullet

    Obsessed with Rocketry Staff Member Administrator TRF Lifetime Supporter Global Mod

    Joined:
    Jan 24, 2009
    Messages:
    20,768
    Likes Received:
    829
    Gender:
    Male
    Location:
    Glennville, GA
    Ben,

    I even forgot who designed the file. It printed beautifully.

    I added a footnote to the prior post.
     
  17. Oct 18, 2018 #17

    Ben Martin

    Ben Martin

    Ben Martin

    Well-Known Member

    Joined:
    Sep 29, 2018
    Messages:
    490
    Likes Received:
    112
    Gender:
    Male
    Location:
    Houston
    Good to see that my design considerations worked out. Thanks for the footnote. After you finish construction you should post the images on Thingiverse.
     
  18. Oct 18, 2018 #18

    cwbullet

    cwbullet

    cwbullet

    Obsessed with Rocketry Staff Member Administrator TRF Lifetime Supporter Global Mod

    Joined:
    Jan 24, 2009
    Messages:
    20,768
    Likes Received:
    829
    Gender:
    Male
    Location:
    Glennville, GA
    Will do.
     
  19. Oct 18, 2018 #19

    cwbullet

    cwbullet

    cwbullet

    Obsessed with Rocketry Staff Member Administrator TRF Lifetime Supporter Global Mod

    Joined:
    Jan 24, 2009
    Messages:
    20,768
    Likes Received:
    829
    Gender:
    Male
    Location:
    Glennville, GA
    Here is one that I printed from thingverse and two I made on my own. AV Sled drill templates.
     
  20. Oct 18, 2018 #20

    cwbullet

    cwbullet

    cwbullet

    Obsessed with Rocketry Staff Member Administrator TRF Lifetime Supporter Global Mod

    Joined:
    Jan 24, 2009
    Messages:
    20,768
    Likes Received:
    829
    Gender:
    Male
    Location:
    Glennville, GA
    Here is one that I printed from thingverse and two I made on my own. AV Sled drill templates.

    upload_2018-10-18_12-4-5.jpeg
     
    Banzai88 likes this.
  21. Oct 18, 2018 #21

    swatkat

    swatkat

    swatkat

    Well-Known Member

    Joined:
    Jun 25, 2014
    Messages:
    1,156
    Likes Received:
    76
    Nice, I did some that just have a variety of mounting holes and zip tie passthroughs with a threaded rod(s) channel in the middle. A few folks are using them now. (See several of the Mach 1 build threads). I also have a more substantial one for 2.6, 3 and 4" that has threaded 3D printed pass-through nuts for deployment wires, etc.
     

    Attached Files:

  22. Oct 19, 2018 #22

    cwbullet

    cwbullet

    cwbullet

    Obsessed with Rocketry Staff Member Administrator TRF Lifetime Supporter Global Mod

    Joined:
    Jan 24, 2009
    Messages:
    20,768
    Likes Received:
    829
    Gender:
    Male
    Location:
    Glennville, GA
    At least one person knows what this is:

    IMG_0775.jpeg
     
  23. Oct 19, 2018 #23

    sl98

    sl98

    sl98

    Well-Known Member

    Joined:
    Dec 27, 2012
    Messages:
    393
    Likes Received:
    8
    Yup and looks great!
     
  24. Oct 19, 2018 #24

    cwbullet

    cwbullet

    cwbullet

    Obsessed with Rocketry Staff Member Administrator TRF Lifetime Supporter Global Mod

    Joined:
    Jan 24, 2009
    Messages:
    20,768
    Likes Received:
    829
    Gender:
    Male
    Location:
    Glennville, GA
    Needs a little sanding but does look good.
     

Share This Page