• If you have bought, sold or gained information from our Classifieds, please donate to Rocketry Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Scans of the CC Express (1302) Decals and Fins

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

K'Tesh

.....OpenRocket's ..... "Chuck Norris"
TRF Supporter
Joined
Mar 27, 2013
Messages
22,549
Reaction score
15,034
Looking to sim up the CC Express (and my own modifications to the Venus Probe using the CC Express).


Problem is, No fin templates and no decals w/scale.


What I need:
Scans of the fins and decals along with a ruler (preferably 1/16, or better markings) to scale the images, and the fin's thickness.


I could also use the length/width of the shock cord, and launch lug.


A scan of the face card would be nice, but not necessary.


Thanks!
Jim


Instructions:
https://www.estesrockets.com/media/instructions/001302_CC_EXPRESS.pdf
 
The launch lug is 3/16" x 2.00" long. It gets cut in half to create the two 1.00" lugs for the build.

Shock cord is 1/4" x 36.00"
 
Oops... Just found this again... Changed it. I've got the sim started again.
 

Latest posts

Back
Top