Quantcast

RRC2 in BT60 Payload Bay

The Rocketry Forum

Help Support The Rocketry Forum:

LaneKG

Well-Known Member
Joined
Apr 29, 2003
Messages
738
Reaction score
1
I got a Missleworks RRC2 for Christmas. I will use it in a BSD Thor, but since I have not received the Thor yet I thought I would see what I could do with a BT60 rocket. I am thinking about trying dual deployment on a Mean Machine So I built a payload bay between two BT60 couplers. It has a dowel that runs the length with eye hooks in the ends. The terminal strips are the european type from Radio Shack. So at this point I have put LEDs on the outputs and run through the test mode. As this rig weighs 7 oz I will use a F39 to launch the Mean Machine. I cut the Mean Machine at the CG and will insert this payload bay there. I am enjoying this new toy.

Greg
 

LaneKG

Well-Known Member
Joined
Apr 29, 2003
Messages
738
Reaction score
1
The end with terminal strip. I just use the two outside terminals.
 

LaneKG

Well-Known Member
Joined
Apr 29, 2003
Messages
738
Reaction score
1
Assembled. I have not put the ports in yet.
 
Top