Rocksim Question

The Rocketry Forum

Help Support The Rocketry Forum:

fireone

Well-Known Member
Joined
Dec 22, 2003
Messages
88
Reaction score
0
I am having problems printing the fin templates in Rocksim, it keeps telling me there is nothing selected. I was able to print the drawing of the rocket but it won't do the fins. Can someone Please help me pop my head out of my .............. well you know.

Thanks
 

Silverleaf

Well-Known Member
Joined
Feb 22, 2003
Messages
1,127
Reaction score
0
IF memory serves, this is a problem with Rocksim ver 7.02. If your registered, get ahold of Apogee and after verifying your info, he'll send you a link to the update - to version 7.04(?)

Bruce Levinson should be along any time to clear this matter up, as hes done some fabulous stuff for Rocksim.

Hope that helps
 

teflonrocketry1

Well-Known Member
Joined
Jul 31, 2011
Messages
1,627
Reaction score
4
Silverleaf is right about the printing bugs in earlier versions of RockSim version 7. The latest and greatist version 7.0.4.5 has these problems fixed. You can get a free upgrade to this version by contacting Apogee Rockets at: https://www.apogeerockets.com/Contact_us.html

If you are using an earlier version of RockSim (4, 5 or 6) please let me know what version you are having printing problems with since I have access to most of them.

Also, under File menu when you select the print option make sure there is a check mark in the boxes next to the Rocket Information, templates and fin sets.

Bruce S. Levison, NAR #69055
 
Top