Research, Experimental, and Homemade Motor Topics.

[cwbullet]

Team,

These topics are reserved for our Research forum which is restricted to US residents. You can have a general discussion in the forum, but when it comes to specific ingredients and formulas, please keep it on the research forum.

To request access:

https://www.rocketryforum.com/threads/research-forum-access.177871/
If you have questions, post them in this thread.

 

[cwbullet]

Just to clarify: I am not saying you cannot discuss the topics, but please steer clear of how to make, assemble, or ingredients. For example, you can probably discuss sugar motors, but lets not discuss how to manufacture or the recipe.

 

[Sooner Boomer]

May we point to another web site that *does* list ingredients?

 

[PayLoad]

Yikes

 

[Dan Griffing]

Are access requests for the Research Forum being processed at this time?

 

[tim cubbedge]

Are access requests for the Research Forum being processed at this time?

Yes. Send required info to @cwbullet via PM.

 

[Dan Griffing]

Yes. Send required info to @cwbullet via PM.

I already have sent multiple forum conversation requests but no response. Might he be on vacation?

Does this require an actual Facebook private message request? If so how can I find him on Facebook or Facebook PM?

 

[tim cubbedge]

I already have sent multiple forum conversation requests but no response. Might he be on vacation?

Does this require an actual Facebook private message request? If so how can I find him on Facebook or Facebook PM?

He's on here every day. It is not done through Facebook.
I will look into it.

 

[Dan Griffing]

He's on here every day. It is not done through Facebook.
I will look into it.

Thank you sir, I appreciate it.

 

[Steve Shannon]

Thank you sir, I appreciate it.

Dan,
Just go to a post by Chuck (cwbullet) and click on his name. Then click on “Start Conversation” and write a message to him.

 

[Rocket Q]

How do I send a pm to cwbullet to join the research forum??

 

[Ez2cDave]

How do I send a pm to cwbullet to join the research forum??

Go to post #13 in this thread . . . Click on his name in Blue, under his photo . . . This box ( below ) will apear . . . Click on "Start Conversation" . . . There you go !

BTW - His name is "Chuck" !



Dave F.

 

[cwbullet]

How do I send a pm to cwbullet to join the research forum??

https://www.rocketryforum.com/threads/research-forum-access.17943/

 

[Steve Shannon]

How do I send a pm to cwbullet to join the research forum??

Click on his name on a post of his, then click on “Start a conversation”

 

[Communist_Phil]

Anyone have any idea why I am unable to send a PM/start a conversation? I don't see the option at all.

 

[cwbullet]

Anyone have any idea why I am unable to send a PM/start a conversation? I don't see the option at all.

Little envelop on the right upper corner.

 

[alan.r.bullock]

Google not subject to being shut down like a forum. Live but the rules or......

Plus particle size of AP.

 

[alan.r.bullock]

Team,

These topics are reserved for our Research forum which is restricted to US residents. You can have a general discussion in the forum, but when it comes to specific ingredients and formulas, please keep it on the research forum.

To request access:
https://www.rocketryforum.com/threads/research-forum-access.17943/
If you have questions, post them in this thread.

Dear Chuck W Bullet,
Subject:Oxygenated,Controlled Crosslikable,TPE Binder

As there appears to be interest generated on the R.F. forum,in what I have to offer technically on the above subject,and considering Ihave answered questions put to me by Aerotec amongst others,may I ask the following?
How may I proceed on the Research Forum,if, as a non U.S. Citizen,I am not allowed(according to your rules), access to this site ?
Respectfully and with Regards,
Alan R.H. Bullock

 

[cwbullet]

Dear Chuck W Bullet,
Subject:Oxygenated,Controlled Crosslikable,TPE Binder

As there appears to be interest generated on the R.F. forum,in what I have to offer technically on the above subject,and considering Ihave answered questions put to me by Aerotec amongst others,may I ask the following?
How may I proceed on the Research Forum,if, as a non U.S. Citizen,I am not allowed(according to your rules), access to this site ?
Respectfully and with Regards,
Alan R.H. Bullock
Tel:44 1904 448683
Mobile,(Cell) 44 (0) 7977224371

we are restricted by law from allowing access to the research topics so non us citizens are not allowed.

 

[tsmith1315]

As there appears to be interest generated on the R.F. forum

While it's not this forum, the amateur rocket (email) discussion list is a good place to discuss these topics:

http://www.arocketry.net/forum.html

 

[cwbullet]

I already have sent multiple forum conversation requests but no response. Might he be on vacation?

Does this require an actual Facebook private message request? If so how can I find him on Facebook or Facebook PM?

Send a PM or Conversation through the forum.

 

[cwbullet]

Just to update:

Here is how to get access:

https://www.rocketryforum.com/threads/research-forum-access.177871/

 

[cwbullet]

May we point to another web site that *does* list ingredients?

No issue with posting a link as long as it does not promote illegal activity.

 

[cerving]

No issue with posting a link as long as it does not promote illegal activity.

Or maybe as long as it doesn't promote dangerous activities... like the YouTube videos of "How to Make Rocket Fuel in Your Kitchen, Right on Top of Your Gas Stove"...

 

[cwbullet]

Or maybe as long as it doesn't promote dangerous activities... like the YouTube videos of "How to Make Rocket Fuel in Your Kitchen, Right on Top of Your Gas Stove"...

That violates other forum policies.

 

[tim cubbedge]

Chuck,

What Statute states this ?

What Law is being cited ?

Thanks,

Dave F.

I believe it has to do with ITAR and decision made by TRF owner.

 

[cwbullet]

I believe it has to do with ITAR and decision made by TRF owner.

It had to do with ITAR and legal advice I was provided by an lawyer and international trade expert.

Chuck,

What Statute states this ?

What Law is being cited ?

Thanks,

It is the advice I was given when I took the job, and it was confirmed by several folks in academia (on the forum). After multiple requests from folks in Canada and UK, I when out and asked several experts, including an attorney, and they confirmed that it is best to protect the forum from any appearance of "skating close to the line".

If you feel inclined to read:

https://en.wikipedia.org/wiki/International_Traffic_in_Arms_Regulations
https://research.mit.edu/integrity-...ormation-documents/export-control-regulations
The bottom line is that we must protect the forum.

 

[cwbullet]

Or maybe as long as it doesn't promote dangerous activities... like the YouTube videos of "How to Make Rocket Fuel in Your Kitchen, Right on Top of Your Gas Stove"...

Or smoking while milling black powder. No recommending these two together ever.

If you don't know safe practices, find a mentor, please.

 

[Mward]

This appears to be the right place for posting a question on the 3-D printing of grains for hybrid motors.

Looking for ideas on filament materials and shapes for medium and high power engines


- Matt

 

[Rschub]

If you use the search tool and enter [hybrid grain 3d] you will get a plethora of results.