During my attempts to cut a Star Orbiter kit’s lower body tube down to size, my cleanup and sanding of the cut made it too short. I’m looking for a replacement with the following specifications, pulled from measurement of the original:
https://www.apogeerockets.com/Build...6mm-X-18in-Slotted-Body-Tube-Estes-BT-60-Size
If all else fails, I’d be willing to try to cut slots in a standard BT-60 as well.
- BT-60 inner and outer diameters
- 3 slots
- Slots cut 24mm (a little less than 1 inch) from the base of the tube
- Slots 3mm (1/8 inch) wide
- Slots 52mm (2 1/8inch) long
https://www.apogeerockets.com/Build...6mm-X-18in-Slotted-Body-Tube-Estes-BT-60-Size
If all else fails, I’d be willing to try to cut slots in a standard BT-60 as well.