- Joined
- Aug 5, 2020
- Messages
- 59
- Reaction score
- 8
My first time configuring a Raven to use in flight. I'm using the apogee and main pyro channels only to start. When selecting Apogee Pyro Channel "At Apogee (Barometric)", the check box for Velocity < Vel1 is also selected by default implying the pyro channel will fire if velocity falls below Vel1. Vel1 is set to 400 ft/sec (about 272 mph) by default which seems high to me. And especially for the main pyro changer which is at the same default.
Question is, should this parameter be reduced in speed or even unchecked which creates a custom pryo channel? Thoughts and opinions are appreciated.
Thanks
Question is, should this parameter be reduced in speed or even unchecked which creates a custom pryo channel? Thoughts and opinions are appreciated.
Thanks