Quantcast

Raven two stage programming

The Rocketry Forum

Help Support The Rocketry Forum:

Red Phenix

Well-Known Member
Joined
Feb 3, 2014
Messages
67
Reaction score
12
Hi Folks

I would value inputs from Raven users about programming the Raven for two stage,flights. Specifically, programming the sustainer Raven, in either backup or primary altimeter modes.

How would you program the sustainer- based Raven to fire at apogee and main deployment altitude if:

A) the sustainer motor did light
B) the sustainer motor didn't light

Thank you for your thoughts, ideas, and input. I'll go get the popcorn, this is going to be good.

Thanks
Noel
 

mikec

Well-Known Member
Joined
May 9, 2009
Messages
2,443
Reaction score
348
There's no difference, apogee is apogee regardless of what the booster does. Barometric (the factory default) would be preferred.
 

SpaceManMat

Space Nut
Joined
Dec 20, 2013
Messages
666
Reaction score
48
There's no difference, apogee is apogee regardless of what the booster does. Barometric (the factory default) would be preferred.
Dont make the mistake of increasing the burn out counter to 2 obviously this will prevent everything working if the sustainer does not light.
 

Latest posts

Top