NO!Aerocon Systems?
the graphite nozzle is the problem
i have a 3d printer. ABS? no PLA OR PETG?I have a SkyRipper 29mm motor. I used Fusion 360 and put in the fuel grain deminsion and 3D printed ABS fuel grains. They work great.
I wrote an email, I asked if they have nozzles compatible with I80 and if they ship to EuropeI wonder if one of the RCS nozzles could be made to work.
https://www.rocketmotorparts.com/Single-Throat_Nozzles/cat1577810_1455491.aspx
already done
I don't have his measurementsI have an I90
Will just the nozzle specs help.?
Tony
I am using ABS and not ABS + which has a lower melting point etc. I measured a factory grain and drew it up in Fusion 360 to print. It workEd good.i have a 3d printer. ABS? no PLA OR PETG?
ok
I try
I'd suggest contacting Tom at Contrail Rockets. He has 29mm hybrid hardware listed. If you know the nozzle throat size, you could probably have a graphite nozzle made for you by Fisher Research.already done
they no longer produce anything
ok i have an open delta printer i have never printed ABS but it is a good opportunity to start.I am using ABS and not ABS + which has a lower melting point etc. I measured a factory grain and drew it up in Fusion 360 to print. It workEd good.
Enter your email address to join: