Stymye
Well-Known Member
- Joined
- Jan 21, 2009
- Messages
- 7,599
- Reaction score
- 18
finished my Rastrocam bash of the astrocam 110
I used a maniac booster and beefed up the recovery section
It's set up for an estes E or whatever else will fit
I added a kevlar thread for the trigger string..
I glued a launch lug thru the upper bt and run the string thru it
than down into the lower coupler thru a v cut
now that I look at it ,I'm thinking the fins should be red
I also made a decal for it with Bel inkjet paper
I used a maniac booster and beefed up the recovery section
It's set up for an estes E or whatever else will fit
I added a kevlar thread for the trigger string..
I glued a launch lug thru the upper bt and run the string thru it
than down into the lower coupler thru a v cut
now that I look at it ,I'm thinking the fins should be red
I also made a decal for it with Bel inkjet paper