Rail Buttons

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 23, 2022
Messages
65
Reaction score
31
Location
New Port Richey, FL
Forgive me if this has been asked before. I am in the process of building a Wildman 4 inch FG vindicator and am wondering if there is a "rule of thumb" for rail button spacing?
I am putting the aft button just forward of the aft centering ring with a weld nut and would like to use a weld nut on the forward button also but seeing that I have already installed the MM I would have to mount the fwd button about 16 - 17 inches from the aft button to have access to install the nut. Too far apart?
Thanks in advance.
Bob Munday
TRA 24687
 
Nope sounds good. You could also glue a rail button mount to the top of the CR on the MMT. Just so you know, I like 3 buttons on some birds also.
 
Back
Top