Quantcast

Quest Zentith II (and stuff)

The Rocketry Forum

Help Support The Rocketry Forum:

Indiana

Well-Known Member
Joined
Jan 18, 2009
Messages
1,226
Reaction score
0
Haven't posted a build for a while. Here's my quest Zenith II.

Pretty standard LPR stuff. Parts:
parts.jpg

Fins and paper cut out for covering:
prefins.jpg

Motor mount:
mount.jpg

Sub-assemblies:
subs.jpg

I dipped the payload section in Future to clean up the scratches::
tube.jpg
 

Indiana

Well-Known Member
Joined
Jan 18, 2009
Messages
1,226
Reaction score
0
I liked it in primer, so I stuck with gray.

The finished product:
1.jpg

Closeup of the metal-fine (Duplicolor):
paint.jpg
 

Indiana

Well-Known Member
Joined
Jan 18, 2009
Messages
1,226
Reaction score
0
Also put together Estes ultra-scale Bullpup :p:

1.jpg

They've gone to peel-n-sticks on this one :mad:.

I also picked up an Eggscaliber marked down at H.L.:
egg.jpg

Not only are they peel-n-sticks, but they only included 3 fin stickers.
 
Last edited:

Indiana

Well-Known Member
Joined
Jan 18, 2009
Messages
1,226
Reaction score
0
I also did a scratch build which is a scaled down version of a BT-80 rocket I scratch built. The green and white one is BT-60. One central 18mm with 2x 13mm.

asm.jpg

This paint (Testors one coat lacquer) is cool, but I don't like it on this rocket.
paint.jpg

Here's the original.
as10.jpg
 
Top