Pro38 Casings & Reloads

[Karl]

Firstly I would like to ask if anyone knows where I can find Pro38 3 Grain Reloads in the UK please ?

Secondly has anyone got pic's of their Pro38 casings with the reload please , so I can see how to do motor retainment.
Thanks
Karl

 

[scm86]

Karl, not sure where to get them in the UK, but on the pro38 website there is a picture, albeit a small picture, that has the full line standing up, and the 38mm's loaded laying down.

a standard mirror clip will work just fine, as will a washer on a machine screw, for that matter.

Scott McNeely

 

[Karl]

The only thing is my rocket is 51mm in dia , and the pro38 motors are 38mm . So theres not much room for retainment. Do I need a thrust ring?
-Karl

 

[llickteig1]

ProXX motors are similar is specifications to compatible diameter Aerotech motors. There is a thrust ring integrated into the aft end.

Retain a Pro38 like you would an Aerotech 38mm.

HTH, --Lance.

 

[Ryan S.]

...with masking tape

 

[Todd Knight]

Slimline retainer from Giant Leap. More expensive than screw and washer trick but very trick and secure.https://www.giantleaprocketry.com