PML Linear launch rail lugs

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Rex R

LV2
Joined
Apr 21, 2010
Messages
6,392
Reaction score
383
to date I have used these on two rockets(size LRL-10-2), one set went on a 2.6" pml black brant vb, and one set one a fg competitor 3. they can be found here; https://publicmissiles.com/product/hardware they accept paint well* and are easy to install.
*from looking at mine there is evidence that there are some rather tight tolerances between the rail and the beveled edges along the top side edges, one might consider removing about 0.01" of material from those areas if you want to paint them, judging from where the paint got removed from mine :). the set on the Black Brant has a number of launches on them and aside from the paint being removed from the bevels seem to be holding up well. I plan to use more of them in the future.
Rex
 
Back
Top