pac-3

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

stevecarr

Well-Known Member
Joined
Apr 1, 2004
Messages
203
Reaction score
0
I'm looking to build a 2" Pac-3.
Problem is I can't find any good fin patterns.
Lots of good pictures, and length and diameter, but nothing on fins.
Reading some of the data from Raytheon suggest that guideance
is done through thrust vectoring, so i may have to over size the fins some to make it stable.
Any thoughts or links are most helpful.
 
I have a RocSim file for a 4" version I can post if that will help. Just divide the dimensions by 2 and you should be ok. The originator of the file is David Shultz.
 
Back
Top