Stewart32
Well-Known Member
- Joined
- Sep 20, 2003
- Messages
- 522
- Reaction score
- 0
I'm looking forward to building a recently aquired TLP ASRAAM.
Close inspection revealed that the main BT (2.6") is out of round on both ends, but not creased. Also, it appears that the centering rings will correct the problem on the thrust end, but what about the cone end. Suggestions welcome and thanks.
Close inspection revealed that the main BT (2.6") is out of round on both ends, but not creased. Also, it appears that the centering rings will correct the problem on the thrust end, but what about the cone end. Suggestions welcome and thanks.