• If you have bought, sold or gained information from our Classifieds, please donate to Rocketry Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Nose Cones, Fins Cans, fins and rings - Make me an offer

Scott S

Well-Known Member
Joined
Aug 28, 2011
Messages
507
Reaction score
33
Everything must go, Make me an offer! Next stop for this stuff is the recycle bin / dumpster. I'd rather see it go to good use.

All the items are new unless noted next to the item but are dirty and/or show signs of wear from storage and moving.
Prices listed do not include shipping unless noted. I'll do my best to keep shipping costs down but will have to resort to priority mail boxes when I run out.
Items will be sold in order of PM received.

LOC Style Nose Cones
78- 1.52" (38mm) Plastic (8.0" long +2.0" shldr = 10") $5.00 8 sold qty updated
18- 2.14" (54mm) Plastic (9.5" long + 2.5" shldr = 12") $6.00 23 sold qty updated
sold- 3.0" (75mm) Plastic (11.25" long + 3.75" shldr = 15")
sold- 3.9" (98mm) Plastic (12.75" long + 3.75" shldr = 16.5")

blow molded foam filled.jpg
Blow Molded Foam injected Nose Cones - These do not fit standard size tubes. Small nose cones fit 29mm thin walled fiberglass.
30- Small - Shldr Dia=1.13" Base dia=1.21" length=4.65" $2.00 2 sold qty reduced
9- Large - Shldr Dia=2.36" Base dia=2.45" length=8.40" $5.00

wood nc.jpg
Wooden Nose Cones
20- 1.52"(38mm) - Unpaited - solid (90g)(7.625" long+1.2" shldr = 8.85") $5
5- 1.52" - Painted - solid (50g) $5
3- 1.52" - Painted - Hollow (50 g) $5

2- 2.14" (54mm) painted solid (275g) (11" + 2.25" = 13.25) $6
1- 2.14" - painted solid (187g) (9.5" + 2." = 11.5) $6
21- 2.14" unpainted solid (275g) (11" + 2.25" shldr = 13.25")shoulder lengths vary $6
1- 2.14" unpainted solid (291g) (13" + 1.5" shldr = 13.25") $6

1- 3.9" (76mm) (628g) (13.5" x 2.75" = 16.25"0 painted $10

4 FG nose cones.jpg
2- 4 " 5:1 Ogive G-10 Nose Cone $20.00 3 sold quantity reduced
0- 4 " 5:1 VonKarmen (?) G-10 Nose Cone Sold

transitions.jpg
6- LOC Old Style Air Frame Reducer 3.00-2.14 $5 2 sold qty updated
4- LOC Old Style Air Frame Reducer 3.90 - 2.56 $7 3 sold qty updateds
3- PML Uerathane Reducer / Tailcone 2.56 - 1.14 $5
0- PML Uerathane Reducer / Tailcone 2.15 - 1.14 $ sold qty updated


baffles.jpg
4- LOC Precision - Modular Baffle Units 24mm & 29mm - $1
2- LOC Precision - Modular Baffle Units 38 mm - $1
4- LOC Precision - Modular Baffle Units 38 mm - $1


4 inch fin cans.jpg
These fin cans are a real loose fit on PML tubes. I have a 4" tube wrapped with 3 layers of 6 oz glass and it's almost a perfect fit. 4 layers would be perfect.
2- Fiberglass 1 piece fin cans 4.1" ID x 3 fins - Trapezoidal - White $25.00 Root Cord 7.875" x span 6.25" approximate1 sold quantity reduced
SOLD- Fiberglass 1 piece fin cans 4.1" ID x 3 fins - Trapezoidal - Black $25.00
1- Fiberglass 1 piece fin cans 4.1" ID x 3 fins - Tapered Swept Back $25.00 Root 10.4" x span 4.5"approximate1 sold quantity reduced




More in post below
 
Last edited:

Scott S

Well-Known Member
Joined
Aug 28, 2011
Messages
507
Reaction score
33
Continued from post above. Shipping not included unless noted.


ql fins.jpg

3 PML Quantum Leap Booster Fins (Set of 4) $5.00
3 PML Quantum Leap Sustainer Fins (Set of 4) $8.00


fins 1.jpg fins 2.jpg
Left to right pictured above

PriceQtyThicknessroot cordspantip cord
sold1 set of 30.1311.753.254beveled leading and trailing edges
sold1 set of 40.138.641.8beveled leading and trailing edges
$4
1 set of 40.0935.755.253beveled leading and trailing edges
$3 / set
2 sets of 30.062942
sold1 set of 30.0935.52.250.6beveled leading and trailing edges
$3 / set
10 sets of 40.06253.71.7
$3
1 set of 30.062441.9beveled leading and trailing edges
$5
1 set of 30.0627.582.75beveled leading and trailing edges - usedused




grabbag.jpg

Grab bag of fins - 20 each mostly 0.062" thick some used - $30 shipped


Tubes & misc stuff - Make me an offer + actual shipping


29 and 38.jpg
29 & 38mm tubes lengths vary sold for $1 per tube


54mm stuff.jpg
54mm tubes, couplers, cones and piston,


2.56 stuff.jpg
2.5 cones, tubes & piston

75mm stuff 2.jpg 75mm stuff 1.jpg

76mm tubes, couplers, piston, fiberglass NC, LOC nosecone sold for $20

misc 1.jpg

Sold for cost of shipping

That's everything
 
Last edited:

Scott S

Well-Known Member
Joined
Aug 28, 2011
Messages
507
Reaction score
33
Shipped out the weekend sales this morning. Everyone should have there stuff by Wednesday, maybe Thursday for those of you on the west coast. Thanks, Scott
 

RKeller

Well-Known Member
Joined
Jul 31, 2014
Messages
1,055
Reaction score
23
got my stuff today after USPS missed the original date, thanks! btw, those small blow molded foam nosecones look like a real close fit to 29mm thin wall fiberglass. I don't have my tubing yet but it will probably be a perfect fit. wishing I got more than 2 now...
 
Last edited:

RKeller

Well-Known Member
Joined
Jul 31, 2014
Messages
1,055
Reaction score
23
just an update, the small blow molded foam nosecone is a perfect fit on 29mm thin wall fiberglass.
Y7yxLohmCbGyyBd1juxIHPaOlZE92bbZTWrFtiE-N4E1sKDgn-u8lYyEHUa8VFdUpaNNDmed_xPc4Zwh-J8KOIBPegrcEvwDD19WIUX83RP9JNak9soOXKE3MTs6LH8KOA7nyMre0LH-vFM9Y-FqBTho2eDhmVs1DHmvvxcm-z_PjsHrjsqNxNDOsSNGH_bJKjFvfqzyeOGBVeAgdhj-gVqGLRC7zVzp-6WEBoJhQtmm4mJR11I_l5h6_vqvDcMMLe6ggJM7pywwABO8AAEKl5xgNQaYF_qRecna0irPSgwfLRPj-kyxRowW00MT0_0qnhmZLCh-H80Quy392ELyKdsbG58xPFEoOhV_FkmYKQeDXCbdsx2TReFou-2E1o9IIPyO9NsGVlIfI0C-OjcT86Y8jIvxNkgr1nhIyQrioBeV37VFLEW9HUwFpyARs3zn0DQTOR60lrBk8U0UAvulC6sdxqcYDZaAexOogv4zdMkKodBBjnvcXcsf2utfMYyfQpgl0yo4a8Th8L3lOSdOPvC_HJMGsPBpcMabYzDM0NU=w890-h667-no
 

Smitty14

Well-Known Member
TRF Supporter
Joined
Sep 8, 2009
Messages
145
Reaction score
4
Location
Omaha, NE
Scott,
If these are still available, I would like them.
$10 1 set of 3 0.13 11.75 3.25 4 beveled leading and trailing edges
$10 1 set of 4 0.13 8.6 4 1.8 beveled leading and trailing edges
Thank you,
Mark
 

Scott S

Well-Known Member
Joined
Aug 28, 2011
Messages
507
Reaction score
33
Hey Guys, I'm on my way out to Balls and won't be back to MD until October 1. The LOC nose cone and the fins are still available. Send me a PM and I'll get back to you when I get back. Sorry for the delay but black rock calls! Scott
 

Scott S

Well-Known Member
Joined
Aug 28, 2011
Messages
507
Reaction score
33
Last week to get nosecones & fins. Everything will be going to a vendor this weekend. Make me an offer.
 

Scott S

Well-Known Member
Joined
Aug 28, 2011
Messages
507
Reaction score
33
Not 100% sure. Possibly a tailcone or reducing coupler. It fits inside a 38mm tube and a 29mm PML tube almost fits inside it. Slight sanding would make it fit. It's aluminum, 5" long. Tapered section is 1" long.
 
Top