New Launch Pad and Build

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

johnnwwa

Well-Known Member
Joined
Jan 18, 2009
Messages
629
Reaction score
0
This is my new launch pad and Fliskits Preator. sorry for no launch photos rain on the way here in the Northwest:mad:
I used Krylon Fushion Yellow and standard Krylon Black for the PVC legs.

If you would like to build this pad here is the linc.

https://launchpad.hofle.com/

For the Preator I opted to use Kevlar for the shock cord and drilled out the transition using a 3/4" forsner bit and glued transition in place , installed a 15" Rockethead Mylar Red Chute.

I Love Fliskits

:D

BAR
John
 
Nice thing about the design is that you can change the angle 90 degrees in either direction from vertical and rotate 360 degrees without moving the pad. Sweet:) I had the 1" & 3/4" PVC so the cost was kept down to around $15.00 .

BAR
John
 
Back
Top