We just released a new addition to our growing line of 1:100th scale Builders Kits a really nice Little Joe II.
The Boyce Aerospace Hobbies 1/100th Little Joe II Builders Kit is a flying replica of the Nasa Little Joe II. The kit, when complete, stands 10.5" tall and makes a fine display piece when not intended for impressive heights. Its total weight is a mere 2.1 ounces and when flown on a C6-5 engine, it can reach 850 feet during flight and then returns to earth on a 15" chute (not included). Each kit features a DLSA 3D-printed Apollo boilerplate capsule and tower, a FDM-printed airframe with fins, corrugation and body conduits, glue-on RCS nozzles, screw-on motor retainer, display engine nozzles and highly-detailed cut decals. Additional parts and supplies required. Complete your 1:100 scale series from Boyce Aerospace Hobbies or display with the Estes Saturn V.
To purchase visit us at: https://boyceaerospacehobbies.com/c...t/products/1-100th-little-joe-ii-builders-kit
Thanks,
Alex and Sheree Boyce
The Boyce Aerospace Hobbies 1/100th Little Joe II Builders Kit is a flying replica of the Nasa Little Joe II. The kit, when complete, stands 10.5" tall and makes a fine display piece when not intended for impressive heights. Its total weight is a mere 2.1 ounces and when flown on a C6-5 engine, it can reach 850 feet during flight and then returns to earth on a 15" chute (not included). Each kit features a DLSA 3D-printed Apollo boilerplate capsule and tower, a FDM-printed airframe with fins, corrugation and body conduits, glue-on RCS nozzles, screw-on motor retainer, display engine nozzles and highly-detailed cut decals. Additional parts and supplies required. Complete your 1:100 scale series from Boyce Aerospace Hobbies or display with the Estes Saturn V.
- The Boyce Aerospace Hobbies 1/100th Little Joe II Builders Kit is a flying replica of the Nasa Little Joe II test vehicle that was used to flight test the Apollo capsule's design and flight characteristics
- This stunning rocket measures 10.5" in length and weighs a mere 2.1 ounces
- Our replica features a DLSA 3D-printed Apollo boilerplate capsule and tower, a FDM-printed airframe with fins, corrugations and body conduits, glue-on RCS nozzles, screw-on motor retainer, display engine nozzles, highly-detailed cut decals and illustrated instructions
- Single 18mm rocket motor recommended
- Soars to an impressive 850 feet on a C6-5 engine
- Requires additional parts: (1) 65mm long BT-20 motor tube, (1) 15" chute, assorted spray paint, super glue, filler primer and 220 grit wet/dry sandpaper
- Includes step-by-step assembly instructions
To purchase visit us at: https://boyceaerospacehobbies.com/c...t/products/1-100th-little-joe-ii-builders-kit
Thanks,
Alex and Sheree Boyce
