New 54mm x 430mm (5g?) research motor

[KCFlyer]

New, never fired 54mm motor with graphite nozzle and forward closure threaded for eyebolt. Still has that new motor smell.

This was manufactured by the gentleman in Oklahoma that does the motor building class.

$150 or best offer, shipped from Lee's Summit, MO.

I took the propellant class down in Wichita a few years ago, and decided building my own motors wasn't going to work. My wife wouldn't let me use the mixer. Found this in a box.

 

[MikeyDSlagle]

Dang, was hoping it was the AT 54/426. Lol. Read it wrong.

 

[sharkbait]

Don't see a threaded closure, see snap rings on both ends.

What's the wall thickness and the bore ID?

 

[KCFlyer]

Don't see a threaded closure, see snap rings on both ends.

What's the wall thickness and the bore ID?

Edited. Forward closure has threaded hole for eyebolt.

My tired old plastic caliper shows about 54.1mm OD, 49.9mm ID, 2.1 wall.



Rick
Lee's Summit, MO

 

[sharkbait]

PM sent