Need help with my Bandit clone

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Leo

Well-Known Member
Joined
Aug 19, 2009
Messages
2,005
Reaction score
422
Location
Germany
Hi everyone,

My long time dream to own and fly the Bandit (K-48) is finally coming true :)

I've finished the rocket for the most part.

Pic:
bandit.jpg


However I do need some assistance from someone here.

I have till now used original Estes parts. Even the engine hook is the same as it was used in them older days :D

Here a picture of the baffle tube I made:

Pic:
bandit_baffle_tube.jpg


The original nose cone was a BNC-55AO but I'm using PNC-55AO instead.

What I need is the decal (KD-48) and the balsa nose block (NB-55).

Any help would be appreciated.

Thanks!
 
Leo,

This link may work better for Excelsior:

https://towrowrow.tripod.com/excelsiorrocketry/

the other link gives a page not found - they have been updating their website quite a bit lately. I have not ordered from them (yet), but you will read all sorts of good things about them in the forums!
 
Thanks everyone :)

Decal is solved but where to find the nose block?

Maybe Excelsior can help me with the nose block too. I'll get in contact with them :)
 
Back
Top