jetra2
Well-Known Member
- Joined
- Jan 25, 2009
- Messages
- 2,795
- Reaction score
- 4
Hi all,
I'm in a little bind...<gulp>. I'm at Eugene's house right now and we're about to cut a buncha parts. I want to cut a new set of fins for my NCR Phantom 4000 that I'm going to be rebuilding with a single 29mm mount and dual 24's, since I love clusters. I didn't realize until about 2 minutes ago that I would be wanting fins, but I left the fin for my pattern at home. If anyone has a Rocksim file in v5 for the Phantom 4000 or one built that you can measure the fins on, that would be great! I'd need a root chord, tip chord, span length, and all that good stuff!
Thanks a bunch,
Jason
I'm in a little bind...<gulp>. I'm at Eugene's house right now and we're about to cut a buncha parts. I want to cut a new set of fins for my NCR Phantom 4000 that I'm going to be rebuilding with a single 29mm mount and dual 24's, since I love clusters. I didn't realize until about 2 minutes ago that I would be wanting fins, but I left the fin for my pattern at home. If anyone has a Rocksim file in v5 for the Phantom 4000 or one built that you can measure the fins on, that would be great! I'd need a root chord, tip chord, span length, and all that good stuff!
Thanks a bunch,
Jason