My first review on EMRR!

The Rocketry Forum

Help Support The Rocketry Forum:

Aron Sanford

Well-Known Member
Joined
Jul 9, 2004
Messages
89
Reaction score
0
I just saw my first review on EMRR! Been a bar for a few years, but this is cool! I will be doing another one soon. The review on now is of a Rocketpad: LACROSSE XM4 kit.
Aron
 

flying_silverad

Well-Known Member
Joined
Jul 23, 2002
Messages
3,168
Reaction score
1
Originally posted by Aron Sanford
I just saw my first review on EMRR! Been a bar for a few years, but this is cool! I will be doing another one soon. The review on now is of a Rocketpad: LACROSSE XM4 kit.
Aron
Nice job on the review. It was one of the first that I looked at. Nice job on the Lacrosse too, was that a nose weight I saw on the base of the cone? Was it installed when you got the kit?
 

Aron Sanford

Well-Known Member
Joined
Jul 9, 2004
Messages
89
Reaction score
0
Hi!
Thanks for the kind words!
Yes, the kit came with the nose weight pre-installed. It had a large screw eye glued in to hold in the washer weights. The washers were also gluded to the balsa; looked like CA glue to me.
Aron
 

flying_silverad

Well-Known Member
Joined
Jul 23, 2002
Messages
3,168
Reaction score
1
I understand that most, if not all, of Rocket Pad kits come with the motor mount already built. Is this something that people like? I
 

Hobbyman

Well-Known Member
Joined
Jul 20, 2004
Messages
91
Reaction score
0
HI every one!
There was only ONE Rocketpad kit with the motor mount pre-built(LARK). This is not the case any more. Now you have to assemble the motor mount on the LARK like on ALL Rocketpad kits. At the time of the first Larks, the centering rings were not that easy to assemble; but we have since changed the rings. We had thought people would have a problem getting the tubes in the centering rings(they could tear) Our new rings are of a higher quallity!
Thanks!
Hobbyman for Rocketpad Kits. [email protected]
 

flying_silverad

Well-Known Member
Joined
Jul 23, 2002
Messages
3,168
Reaction score
1
Originally posted by Hobbyman
HI every one!
There was only ONE Rocketpad kit with the motor mount pre-built(LARK). This is not the case any more. Now you have to assemble the motor mount on the LARK like on ALL Rocketpad kits. At the time of the first Larks, the centering rings were not that easy to assemble; but we have since changed the rings. We had thought people would have a problem getting the tubes in the centering rings(they could tear) Our new rings are of a higher quallity!
Thanks!
Hobbyman for Rocketpad Kits. [email protected]
Hey there!!!:D
 
Top