So I finally got around to making my first high power rocket over the past few weeks.
Should have made a build thread but #Lazy
Did the 2.6" x 49" Callisto build from Make: High Power Rocketry with a 29mm motor mount. Looking forward to flying it at the next DARS launch!
Let's consider this a fast paced build thread [emoji16]
Lots to do...
A 100 tooth saw blade cuts quite nicely it turns out. Glued the 3 pieces of plywood together to get equal cuts
I learned I suck at making fillets
But, priming isn't so bad
47 coats of black later I have enough for a few stripes!
Of course, I need some decals... Tweaked the transformers bumblebee logo to be a bit more plain, then found a bumblebee specific font and some sticker paper to print on.
Ready for decals
Not perfect, but... Close enough
Need to put some clear coat on it now to keep the paint looking ok.
Should have made a build thread but #Lazy
Did the 2.6" x 49" Callisto build from Make: High Power Rocketry with a 29mm motor mount. Looking forward to flying it at the next DARS launch!
Let's consider this a fast paced build thread [emoji16]
Lots to do...
A 100 tooth saw blade cuts quite nicely it turns out. Glued the 3 pieces of plywood together to get equal cuts
I learned I suck at making fillets
But, priming isn't so bad
47 coats of black later I have enough for a few stripes!
Of course, I need some decals... Tweaked the transformers bumblebee logo to be a bit more plain, then found a bumblebee specific font and some sticker paper to print on.
Ready for decals
Not perfect, but... Close enough
Need to put some clear coat on it now to keep the paint looking ok.