MPC Zenith II two stage payloader
- Thread starter cxm
- Start date
Help Support The Rocketry Forum:
Yeah, I wore one out with a scratch booster that could take an E9-0, Have a second one ready that is actually ready to fly with an
E12-0 and and Adept Rf tracker. The tracker actual fits with the antenna coming out aft through the plastic bulkhead.
I was lucky I didn't lose the first one as it took a long time to come down even on a metallic silver streamer.
Kurt
E12-0 and and Adept Rf tracker. The tracker actual fits with the antenna coming out aft through the plastic bulkhead.
I was lucky I didn't lose the first one as it took a long time to come down even on a metallic silver streamer.
Kurt
Yes and no. I have the Quest Z2 and the lines are the same. Nosecone and base are plastic. I realize yours is the MPC kit and not the Quest: https://www.erockets.biz/quest-flying-model-rocket-kit-zenith-ii-3005/
I have the stock booster and have flow on that in smaller venues but built a booster for the E size motors to really punch it up there. In that form it's not the same but the sustainer looks close.
Nonetheless, it's a fun design. Kurt
I have the stock booster and have flow on that in smaller venues but built a booster for the E size motors to really punch it up there. In that form it's not the same but the sustainer looks close.
Nonetheless, it's a fun design. Kurt
Similar threads
