Missile Works RRC3 - 5 pin comm connector replacement

[TX-Redleg]

I need to replace the 5 pin com connector on a Missile Works RRC3. One of the pins is broken and it looks like I can desolder the 5 pin connector and replace it. However I can't determine the exact model replacement. It is close to a JST PH 2.0 5 conductor, but that doesn't appear to be a match. Does anyone know the part number for the male connector that Missile Works uses, and a supplier? It is the center connector in the attached picture labeled COMM.

 

[Steve Shannon]

If you write to Jim Amos he might send you one.
Otherwise I would start looking in the Molex connectors catalog to see if it’s from there.

 

[TX-Redleg]

If you write to Jim Amos he might send you one.
Otherwise I would start looking in the Molex connectors catalog to see if it’s from there.

Thanks, Jim got back to me the same day. For the record the item is:

Hirose DF3 series.
https://www.digikey.com/en/products/detail/hirose-electric-co-ltd/DF3A-5P-2DSA/141521

 

[Steve Shannon]

Thanks, Jim got back to me the same day. For the record the item is:

Hirose DF3 series.
https://www.digikey.com/en/products/detail/hirose-electric-co-ltd/DF3A-5P-2DSA/141521

Good job! Also, thanks for letting us know what connector it is. That might help someone else.