I was inspired by member Long-gone when I saw his post on a mini little joe II. I had an old Apollo capsule with a busted LES from a Centuri Saturn 1B kit that meet it’s demise some years ago. So........thought that’s a nice challenge to build. Used a wooden pencil crayon as the tower for the LES tower and secured it to the remaining flange of the tower with a plastic straw. Have prepared wraps for the tower, capsule and CSM. Will try a corrugated wrap for the lower section, used a smooth card stock scored with an awl every 2mm. Hopefully this will show thru when spray painted. Have prepared fins each with 3 pieces. This will be a challenge to get glued on the BT. Even more of a challenge to stay on during launch. Presently the motor mount and shock cord have been installed. Waiting for the glue to dry.