- Joined
- Feb 19, 2009
- Messages
- 1,769
- Reaction score
- 1,018
I've gathered up enough parts to get started, so I thought I'd share a few pictures.
This will be a BT80 (1.59x) sized der Red Max. Some of the features are TTW fins, interchangeable motor mounts for single 24mm, 3x 24mm cluster, 2x 18mm cluster, and 3x 18mm cluster. It will also have a removeable baffle system.
I'm thinking about using either typing paper or maybe some Tyvec sheet to laminate on the 3/16" thick fins for extra strength.
The tubes and centering rings came from BMS. The cluster kits from FlisKits and ThrustAero. Balsa nose cone from Sandman. Decals from Fred/Excelsior Decals.
Excuse the clutter in the pics....I'm a slob. Just ask my wife
This will be a BT80 (1.59x) sized der Red Max. Some of the features are TTW fins, interchangeable motor mounts for single 24mm, 3x 24mm cluster, 2x 18mm cluster, and 3x 18mm cluster. It will also have a removeable baffle system.
I'm thinking about using either typing paper or maybe some Tyvec sheet to laminate on the 3/16" thick fins for extra strength.
The tubes and centering rings came from BMS. The cluster kits from FlisKits and ThrustAero. Balsa nose cone from Sandman. Decals from Fred/Excelsior Decals.
Excuse the clutter in the pics....I'm a slob. Just ask my wife