blackjack2564
Crazy Jim's Gone Banana's
There has been a lot of interest in how to make and apply decals with a standard paper and printer.
Recently my Comp4 had a bad flight where the M-1500 research motor toasted the airframe. A complete rebuilding of this and several other rockets that needed fixing was documented here https://www.rocketryplanet.com/forums/showthread.php?t=2792 Along with techniques for fixing holes in tubes and replacing broken fins.
I just finished painting the repaired Comp 4 , and will document the decals here to show how it's done.
All that's needed is some 3M super 77 adhesive, a plain paper printer, and some clear coat with UV inhibitor. This keeps the color from fading in the sun,and waterproofs them.
Recently my Comp4 had a bad flight where the M-1500 research motor toasted the airframe. A complete rebuilding of this and several other rockets that needed fixing was documented here https://www.rocketryplanet.com/forums/showthread.php?t=2792 Along with techniques for fixing holes in tubes and replacing broken fins.
I just finished painting the repaired Comp 4 , and will document the decals here to show how it's done.
All that's needed is some 3M super 77 adhesive, a plain paper printer, and some clear coat with UV inhibitor. This keeps the color from fading in the sun,and waterproofs them.