Magnetic Apogee Detector ( magnet 4 ) version 4 ?

[bobby_hamill]

Looking for a Magnetic Apogee Detector that has " Magnetic 4 " written on the circuit board

Does not half to be working but the board MUST be intact

I can make my own board but can not do the "through hole soldering " like the original board has

here is an image of the board front and back

 

[ksaves2]

I take it you checked with Aerocon and see if he has any lying around? http://aeroconsystems.com/cart/flight-avionics/magnetic-apogee-detector/

The only alternative is the Zeptobit Zeptomag: https://www.tindie.com/products/ZeptoBit/zeptomag/

If apogee only, one advantage with MAD is one doesn't have to have a static port and it can be sealed up in a bay. Kurt

 

[bobby_hamill]

Already checked with aerocon systems
I use it as a back up along with my altimeter

Bobby

 

[kramer714]

I have one that is 'Magnet 6', Haven't used it for years, board works (or did last time I used it).

Looks like the board you show.

Work for you?

Mike K

 

[bobby_hamill]

Mike

any close up photos ?
Highest I ever seen was a magnet 4

Bobby

 

[kramer714]

Pictures of the board, at least 5 years old.

Mike K

 

[bobby_hamill]

Mike

Do you have any documentation for this version ?
How much you want for it ?

Bobby

 

[kramer714]

I don't think I have any documentation any more..

Send me your address and we will figure something out.

Mike K

 

[bobby_hamill]

PM sent

I don't think I have any documentation any more..

Send me your address and we will figure something out.

Mike K

 

[ksaves2]

I don't think I have any documentation any more..

Send me your address and we will figure something out.

Mike K

I suspect the operation would be the same. I find the green LED acts as a continuity indicator. You have to remember that one cannot tip the rocket over with the device turned on and connected to live charges. Yeah, that's elementary but in the
heat of a launch one can easily forget. I haven't had a mishap in 10 years with this type of device but am always on my toes when flying it. Too bad they aren't available as they are basic and reliable. I shorted one out with home made
ematches and have no problems with commercial ones. Kurt