Mach 10 canopy

[foose4string]

I'm currently working on In Flight's Mach10 clone. True to the original instructions, the In Flight instructions have you mount the forward edge of the canopy 1/4 inch from the front edge of the tube. This seemed further forward than what I thought I had remembered seeing, so I checked the catalog pics to make sure I wasn't imagining things. I know drawing and camera perspective can play tricks on the eyes, but is it just me, or does the canopy look like it sits farther back than 1/4 inch?

https://www.ninfinger.org/rockets/catalogs/centuri71d/71dcen44.html
https://www.ninfinger.org/rockets/nostalgia/73cen032.html
https://www.ninfinger.org/rockets/catalogs/centuri75/75cen6.html

If I were to guess, I'd say the canopy was closer to 1/2 to 3/4 inch from the front. In later catalog photos, it is exaggerated even more ...perhaps as much as an inch or more?

I know the canopy placement probably isn't critical and just an aesthetic thing, but what is everyone else's take on this?

 

[sj_h1]

looks more like 3/4 to 1 inch to me.

 

[InFlight]

Hi Craig,

I replyed to your question over on YORF
https://www.oldrocketforum.com/showthread.php?p=75978#post75978
.

 

[dcastle]

I discovered this too and, as discussed in my prior post on the topic, did a little research on it...

https://www.rocketryforum.com/showthread.php?p=37566#post37566

 

[foose4string]

Oh, thanks Dan, I missed that. I thought it might have been discussed before, but I couldn't remember when or where. I though Ray was referring to the .pdf on Jimz being different from the .tiff listed there. I didn't bother checking YORP because I know that Jimz and Scott try usually avoid cross posting instructions. Makes sense that Scott has them up since they are indeed different versions.