I haven't done any dual deploy rockets and wanted to start with something that could fly on smaller motors to get some experience at a lower cost/flight. I have also wanted to build a fiberglass rocket. A few months back, Mach 1 had their Warhead kit on special for 20% off and it seemed to meet most of my criteria except, of course, it wasn't a dual deploy rocket.
https://www.mach1rocketry.com/store/p231/Warhead_3"_Premium._5:1_Fiberglass_Cone.html
The deluxe version has a 5:1 fiberglass nosecone so there should be enough room to modify this rocket to head end deploy. I didn't want to try to cut the body tube to make a switch band so I ordered a 1" piece of coupling and will build a switch band free AV bay.
I had a little bit of work done on this before starting this thread. I'll post up what I have done so far but future updates may be a bit slower due to, well, life.
https://www.mach1rocketry.com/store/p231/Warhead_3"_Premium._5:1_Fiberglass_Cone.html
The deluxe version has a 5:1 fiberglass nosecone so there should be enough room to modify this rocket to head end deploy. I didn't want to try to cut the body tube to make a switch band so I ordered a 1" piece of coupling and will build a switch band free AV bay.
I had a little bit of work done on this before starting this thread. I'll post up what I have done so far but future updates may be a bit slower due to, well, life.