MasonH
Well-Known Member
- Joined
- Aug 20, 2011
- Messages
- 2,335
- Reaction score
- 1
In my exodus from rocketry, I figured it would be good to get rid of this project.
The main tube has the glassine peeled off, ready for fiberglass.
Motor tube has SOME glassine peeled off to help adhesion to the centering rings
ALL tube ends are CA'd to prevent fraying.
I have rail button mounts from weld nuts, bent to fit the tube contour.
Aeropac Retainer
NOTHING has been glued
Missing the parachute
No damage whatsoever.
I would REALLY like to get $100 for it to go towards a car. But I'm flexible.
Forgot to mention: EMAIL ONLY. [email protected] NO PM's.
The main tube has the glassine peeled off, ready for fiberglass.
Motor tube has SOME glassine peeled off to help adhesion to the centering rings
ALL tube ends are CA'd to prevent fraying.
I have rail button mounts from weld nuts, bent to fit the tube contour.
Aeropac Retainer
NOTHING has been glued
Missing the parachute
No damage whatsoever.
I would REALLY like to get $100 for it to go towards a car. But I'm flexible.
Forgot to mention: EMAIL ONLY. [email protected] NO PM's.
Last edited: