exprditer789
Well-Known Member
- Joined
- Feb 11, 2010
- Messages
- 290
- Reaction score
- 0
Thats one heck of an Expediter, Terry CF is the whole build CF, or just the fin can? Btw, thats pretty cool.
What are you doing about the nose cone attachment? I always dremel a hole in the shoulder and then attach an eye bolt with a large washer and nut inside on my PML rockets.
I think i am going to just friction fit the nose cone right now with some tape sense it is not duel deploy.Alex
I think i am going to just friction fit the nose cone right now with some tape sense it is not duel deploy.Alex
Just finished the first primer coat on my expediter.I used Duplicolor filler primer works great and sands great too.Here are some pictures.
Im on the way to get some Bondo.I filled the deep spirals and that worked out fine then there were smaller ones and i thought they were ok but they did not fill with Primer so now i have to use bondo to fill them and the seam on the nose cone and air frame reducer.Alex
Enter your email address to join: