sandman
Well-Known Member
- Joined
- Jan 17, 2009
- Messages
- 10,563
- Reaction score
- 20
Here is something that was a sidetrack on a different thread. Rather than cloud the issue I thought I'd start a new on.
After I recieved a BT101 replacement body tube from Este, I cut it to fit my old Maxi V-2. The peice that repained turned out to be about 1/8" too long to make a 4" diameter Little Joe II.
I patterned the capsule exactly after the old Estes NCK-29 kit. I just scaled it up to fit the body tube.
I turned the nose and escape tower parts on a drill and this is the results.
After I recieved a BT101 replacement body tube from Este, I cut it to fit my old Maxi V-2. The peice that repained turned out to be about 1/8" too long to make a 4" diameter Little Joe II.
I patterned the capsule exactly after the old Estes NCK-29 kit. I just scaled it up to fit the body tube.
I turned the nose and escape tower parts on a drill and this is the results.