i launched
Sprite Upscale, E9-6 - always a joy to watch!
comanche 3, C6-5 nice flight! streamers were JUST enough to bring it down undamaged.
Quest Harpoon, D12-0,A6-3 perfect flight, but i misjudged the wind, landed it in a tree, over the fence...broke a fin off it trying to get it down with a stick.
recovered.
estes Rogue, a3-4T - 25 year old rocket from my childhood. perfect flight! its second, if i'm not mistaken.
Mosquito 3D, 3xD12-5 - perfect boost! shock cord separation. all parts recovered. no damage. i built this one to LAST!
Micro TriAgain, 3xMMX - flashtape ignition, since i scavanged a nosecone to put on it, i neglected any nose weight. slightly unstable flight. good recovery.
comanche 3, D12-0, b6-0. a8-3 24mm booster separated before igniting the second stage...ballistic recovery.
at initiator, F40-7 - chute fouled, previously broken fin broke again
Big Daddy, E11-3J - beautiful flight!
Fat Boy^2, a3, a3, c6, c6, c6, c6, e9, e9 ->e9-4 - Flashpan ignition, 6 motors lit in the booster, model was not stable enough and sustainer ignited while the rocket was horizontal...sustainer not recovered. booster deployed the chute, but shock cord separation/one fin damaged on landing.
Orbital Transport, C11-3 - probably need a little longer delay, perfect flight, but front part of body tube exploded from the ejection pressure
glider performed perfectly to the joy of the spectators!
Super Big Bertha, C11 - not enough motor, deployed too low for chute to open
Super Big Bertha, E9, E9 - only one motor lit good recovery
Mosquito clone, a10-3t - not recovered
estes Bullpup D12-7 - nice flight, not recovered
Tridentish, C11-3 - deployment failure
ok, there's the details on my stuff.
RocketBBoy and several other rocketeers also launched many rockets today, so i'd say even though there were some losses, it was a great day of flying!