Senior Space Cadet
Well-Known Member
- Joined
- May 23, 2020
- Messages
- 717
- Reaction score
- 310
Well, it might have been overkill to epoxy the fins and launch lugs, but it wouldn't have been overkill to epoxy the motor mount together and into the rocket.
I had two fail on me. One apparently blew out the engine block on launch and one blew the whole motor mount out on ejection.
I had a third that seems to have stripped out or broke the engine hook.
Of those three, one is fixable, and two probably aren't, though I may try putting a screw in retainer on the rocket that broke the hook.
Otherwise, all the rockets flew great, until they broke.
I had two fail on me. One apparently blew out the engine block on launch and one blew the whole motor mount out on ejection.
I had a third that seems to have stripped out or broke the engine hook.
Of those three, one is fixable, and two probably aren't, though I may try putting a screw in retainer on the rocket that broke the hook.
Otherwise, all the rockets flew great, until they broke.