- Joined
- Mar 27, 2013
- Messages
- 22,536
- Reaction score
- 14,946
Are you looking at 3D Finished ? or 3D Unfinished?
Are you looking at 3D Finished ? or 3D Unfinished?
Can't be done in any practical way, sorry.
K'Tesh, I'm trying to create a ork file of the Kraken. Making tube fins is easy but how does one alter the shape of a tube fin? Can it be done?
I should probably clarify. If your goal is to come with something that really *looks* like the Kraken, you're out of luck. If you just want to simulate its flight characteristics and don't care so much what it looks like, then you can probably get a reasonable approximation but just putting in standard tube fins with length equal to the "average" length of the Kraken tubes.
I should probably clarify. If your goal is to come with something that really *looks* like the Kraken, you're out of luck. If you just want to simulate its flight characteristics and don't care so much what it looks like, then you can probably get a reasonable approximation but just putting in standard tube fins with length equal to the "average" length of the Kraken tubes.
If you happen to do this sim, try also putting on four sets of three fins, each the shape of the kraken fin seen from the side. I'd be curious how well either method squares with real life.Yes, I'm wanting to see the flight sims of the Kraken & not so much the exact look. What's you best guess on the average length? They are 7" long at the body tube and 1.5" at the top. I'm guessing around 2.5" - 3".
Yes, I'm wanting to see the flight sims of the Kraken & not so much the exact look. What's you best guess on the average length? They are 7" long at the body tube and 1.5" at the top. I'm guessing around 2.5" - 3".
Enter your email address to join: