3D Printing Inverted Pursuits Lab 3D File Repository

[JBoyson]

Decided to start this thread as I will be dropping as many files as I can and wanted to keep things organized. Files will be uploaded to Thingiverse with some instructions and video build guides linked.

My most recent upload is a rocket I call VIPER 1. It is a cluster core design and has been flown several times over the last 2 years at Kloudbusters. I love this rocket because it's easy to fix when it breaks.
I will have a V2 being uploaded in a few months because I felt it was time.

VIPER 3D Printed cluster rocket by Inverted_Pursuits_Lab

VIPER is a partially 3D printed rocket. Flight Test: https://youtu.be/VS7LyfjCEJM BFTA and Core alignment done same way as marking out fins: https://youtu.be/_sWssDOyFms It requires a 3in phenolic tube 30in long as well as a 3in plastic nose cone. You will also need 4-40x0.5in countersunk screws...

www.thingiverse.com

Here is a flight video:

 

[JBoyson]

I also have a housing for the ESTES Astrocam I made last year and flew several times including on L1 and an L2 cert flight.

ESTES AstroCam housing for rockets by Inverted_Pursuits_Lab

This camera housing is designed to house the Estes Atrocam. There are 3 variations available in this download: 38/54mm, 3in and 4in diameters. This is an easy way to quickly attach a wonderful little camera to your rocket. Recommend printing in PETG, can easily be printed in PLA or ABS. To see...

www.thingiverse.com

Infinity Flight with Astrocam and mount:

 

[JBoyson]

3D Printed Nose cones I've been using as replacements for ESTES and other rockets when they break. I will add more files to this as I make more.

Rocket Nose Cone Replacement Set by Inverted_Pursuits_Lab

The nose cones are designed to be a fast and easy replacement to the standard Estes Rocketry and other PVC Nose Cones. After Printing the desired nose cone the part may require cleanup with sandpaper and/or a file. This set offers 6 different Nose Cone Configurations 29mm Nose Cone - Compatible...

www.thingiverse.com

Flew some on my Solar Sailer Replica Build:

 

[JBoyson]

One of the 1st Rockets I ever designed was called 3D Higher. Fliers Note: Will blow itself in half it packed wrong for parachute deploy.
I've also flown variants of this rocket as Phoenix:

Only the most recently flown designs have been uploaded for you viewing.

3D Higher Model Rocket by Inverted_Pursuits_Lab

Rocket Designed to fly off 29mm motors for best performance. The Rocket glues (super glue / CA glue) together Rail buttons can be mounted to the printed holes (be sure to line these up as you glue it together). You can alternatively glue a standard Estes launch lug to the exterior (Uses lots of...

www.thingiverse.com

 

[thzero]

Decided to start this thread as I will be dropping as many files as I can and wanted to keep things organized. Files will be uploaded to Thingiverse with some instructions and video build guides linked.

My most recent upload is a rocket I call VIPER 1. It is a cluster core design and has been flown several times over the last 2 years at Kloudbusters. I love this rocket because it's easy to fix when it breaks.
I will have a V2 being uploaded in a few months because I felt it was time.

Like it... I was tossing around something like that to use with fiberglass or plywood fins. Hadn't considered the clamshell approach.

 

[JBoyson]

Designed Several Charge Wells recently and uploaded them to thingiverse. The 2 designs are functionally identical and both come in 0.5g, 2g, 5g and 10g variants. I have tested the designs and they hold up well to use at designated charge loads.
Please use with caution!

Rocket Charge Wells V2 by Inverted_Pursuits_Lab

Please Print in PETG for best results. Files include Version 2 0.5g, 2g, 5g and 10g charge wells. 5g and 10g wells mount with #10 hardware 0.5g and 2g wells mount with #6 hardware Please print at your own risk and remember to test prior to flight in a safe and controlled manner with proper PPE...

www.thingiverse.com

Rocket Charge Wells by Inverted_Pursuits_Lab

Please Print in PETG for best results. Files include 0.5g, 2g, 5g and 10g charge wells. 5g and 10g wells mount with #10 hardware 0.5g and 2g wells mount with #6 hardware Please print at your own risk and remember to test prior to flight in a safe and controlled manner with proper PPE and...

www.thingiverse.com

 

[Zyzzyva1000]

I also have a housing for the ESTES Astrocam I made last year and flew several times including on L1 and an L2 cert flight.

ESTES AstroCam housing for rockets by Inverted_Pursuits_Lab

This camera housing is designed to house the Estes Atrocam. There are 3 variations available in this download: 38/54mm, 3in and 4in diameters. This is an easy way to quickly attach a wonderful little camera to your rocket. Recommend printing in PETG, can easily be printed in PLA or ABS. To see...

www.thingiverse.com

Infinity Flight with Astrocam and mount:

Has anyone been able to print this? The model looks great, but when I load it up its like 2x3 mm in size (for all the size options). If I scale it by like 2000% it looks right, but Im not sure what the actual dimensions are supposed to be.

 

[Kelly]

What software are you using? I looked at the 38-54 housing, and it appears the units are inches. Cura doesn't like this - always wants mm- so if you scale all dimensions by 2540% it should be right. (Assuming that's the tool you're using)

 

[Zyzzyva1000]

What software are you using? I looked at the 38-54 housing, and it appears the units are inches. Cura doesn't like this - always wants mm- so if you scale all dimensions by 2540% it should be right. (Assuming that's the tool you're using)

Flashprint, which also assumes mm. Ok so makes sense, thanks!

 

[JBoyson]

Ya, its common to have to scale a model by 2540% to go from mm to in. Hopefully everything works out as your printing. I'd love to see images once you're done!

 

[JBoyson]

Designed Several Charge Wells recently and uploaded them to thingiverse. The 2 designs are functionally identical and both come in 0.5g, 2g, 5g and 10g variants. I have tested the designs and they hold up well to use at designated charge loads.
Please use with caution!

Rocket Charge Wells V2 by Inverted_Pursuits_Lab

Please Print in PETG for best results. Files include Version 2 0.5g, 2g, 5g and 10g charge wells. 5g and 10g wells mount with #10 hardware 0.5g and 2g wells mount with #6 hardware Please print at your own risk and remember to test prior to flight in a safe and controlled manner with proper PPE...

www.thingiverse.com

Rocket Charge Wells by Inverted_Pursuits_Lab

Please Print in PETG for best results. Files include 0.5g, 2g, 5g and 10g charge wells. 5g and 10g wells mount with #10 hardware 0.5g and 2g wells mount with #6 hardware Please print at your own risk and remember to test prior to flight in a safe and controlled manner with proper PPE and...

www.thingiverse.com

New video of these charge wells in action is now live for anyone curious

 

[Zyzzyva1000]

Ya, its common to have to scale a model by 2540% to go from mm to in. Hopefully everything works out as your printing. I'd love to see images once you're done!

Yea I just didn’t realize what units it was in. I tried to open in fusion 360 but fusion kept crashing on me yesterday. Anyway I scaled and printed on 100% infill with some matte PLA. Turned out great. Just looking for some small removable rivets so I can attach without gluing. Have a custom super big Bertha under construction and this will fit on the payload section perfectly. I’ll post pics later. Thanks!!

 

[Zyzzyva1000]

Ya, its common to have to scale a model by 2540% to go from mm to in. Hopefully everything works out as your printing. I'd love to see images once you're done!

One further question on this, what size screws is the lid designed to be closed with? I did find some nice small 2 mm plastic removable rivets so I'll post when I have it mounted, hopefully will work as a removable solution.

 

[JBoyson]

It's deigned for #2 screws, but its easy to drill it out a bit and use #4 screws. I believe I had found some brass #2 screws at the hardware store and designed around that because I liked it being small.

 

[JBoyson]

Recently created a backup of my thingiverse repository on Printables.com, you'll be able to find all the same files plus some new ones there.
Playing with the idea on only using printables, but haven't decided.

Printables

www.printables.com

 

[JBoyson]

Just uploaded a new rocket model to Printables. This is V2 of my PIXI design. Basically just increased the structural integrity where it blew apart.

Printables

www.printables.com

 

[JBoyson]

Coming in Hot with Rocket Boosters, these are by no means the most refined models I've ever produced and do require a bit of fiddling. I'm looking at making another version to simplify them further..... but that'll be a bit

Printables

www.printables.com

 

[JBoyson]

Just dropped a new rocket on Printables, this is a design I've thoroughly tested and crashed before release. I was origionally looking at trying to sell this model as a kit but decided to give it to you all as a gift!

Printables

www.printables.com

 

[JBoyson]

Just uploaded new files for a multi-pad launch controller. Wiring schematic included.

Printables

www.printables.com

 

[JBoyson]

New file just posted for an Estes vapor Nose Cone replacement,

Printables

www.printables.com

 

[JBoyson]

Additionally just poseted teh Estes Mean Manchine Nose Cone replacement.

Printables

www.printables.com

 

[JBoyson]

The Little Nick, this model is now avaliable for download at Printables. This is a fun little rocket that flies well in Parks on A & B motors and in a largers pasture on C's.

Printables

www.printables.com

 

[JBoyson]

Just dropped the files for Macey on Printables. Check it out. Another 18mm sized model rocket for you to mess with. Would love to see your builds when finished!
https://www.printables.com/model/303561-macey-3d-printed-model-rocket

 

[cwbullet]

I am printing one right now. Thanks.

 

[JBoyson]

I am printing one right now. Thanks.

How'd the print turn out?

 

[JBoyson]

New EggFinder LCD & Missile Works T3 Box Live on Printables.
This is a remix of a thingiverse file, both work great!

Printables

www.printables.com

 

[JBoyson]

BUISNESS CARD / REN HOLDER

Recently made 2 different models for a fun buisness card holder to use at launches and though some of you might find it fun to use so I uploaded them to Printables!

Version 1.0

Printables

www.printables.com

Version 2.0

Printables

www.printables.com

 

[JBoyson]

New Electronics Bay design, this is my V1. I'm currently working on a V2

Printables

www.printables.com

 

[JBoyson]

Just added another new rocket to Printables. Nose Cone not included in files. Only Tail/Motor Mount and OpenRocket Files
POWERSLIDE!

Printables

www.printables.com