I am looking for an alternative to rattle can paint. I have a 10ish gallon tank on my air compressor. It is a smaller size craftsman. Anybody have a similar setup?
inexpensive paint gun that can be used with 10 gallon compressor
- Thread starter solid_fuel
- Start date
rharshberger
Well-Known Member
I use the cheap Harbor Freight touch-up spray guns with my Porter Cable pancake compressor which is like 3 gallon cap.
I get pretty decent results with that Harbor Freight touch-up gun and pancake compressor. Should be even better with your 10 gallon.
Are you looking for an HVLP solution? If so there are two factors you need to consider when matching a HVLP to a gun. PSI is one of them but CFM is more important for HVLP. Keep in mind that regardless of the CFM rating you cannot deliver that to the gun if the delivery system is restricted. Also for entry level compressors you may find that the CFM they can sustain is below the majority of HVLP guns on the market. Here is a link on the topic https://www.rocketryforum.com/showt...-best-practises-and-HVLP-setup&highlight=hvlp
- Joined
- Jan 3, 2011
- Messages
- 366
- Reaction score
- 50
an airbrush paints rockets just fine under about 4 in diameter. I have a larger quality automotive touch up gun that i also use for 4 in and up.
Sent from my iPhone using Rocketry Forum
Sent from my iPhone using Rocketry Forum
