Quantcast

Huntsville Area - LOKI M1882-LW Rocket Motor

The Rocketry Forum

Help Support The Rocketry Forum:

lkal32

Well-Known Member
Joined
Jan 18, 2009
Messages
349
Reaction score
2
I have an older LOKI M1882-LW reload that I intended to use for my L3 cert. Havent finished my build and would like to see the motor get used rather than just sit for even longer.

Anyone who can pick it up in the Huntsville area can have it for half price.
 
Last edited:

lkal32

Well-Known Member
Joined
Jan 18, 2009
Messages
349
Reaction score
2
Reload contains 5 grains (all still sealed in original packaging) - three of which have a 03/01/2011 date, the other two have a date of 10/12/2010. Grains do not feature convolute liners.
The instructions, delay, and orings are again still sealed as new.

Measurements of the smoke grain are 1.125" diameter x 1.9375". Should fit the new bulkhead but may require some sanding to knock off about 1/16" to allow the snapring to fit the new forward closures.
 

Brent

Well-Known Member
Joined
Jan 19, 2009
Messages
1,600
Reaction score
43
Reload contains 5 grains (all still sealed in original packaging) - three of which have a 03/01/2011 date, the other two have a date of 10/12/2010. Grains do not feature convolute liners.
The instructions, delay, and orings are again still sealed as new.

Measurements of the smoke grain are 1.125" diameter x 1.9375". Should fit the new bulkhead but may require some sanding to knock off about 1/16" to allow the snapring to fit the new forward closures.
Wish you could ship.
 

Nytrunner

Pop lugs, not drugs
Joined
Oct 15, 2016
Messages
7,175
Reaction score
2,644
Location
Huntsville AL
I know a guy in the Birmingham area prepping an L3 flight. And I think he likes Loki too
 

Latest posts

Top