Quantcast

High speed for lounchrod out

The Rocketry Forum

Help Support The Rocketry Forum:

turkkusuroket

Member
Joined
Dec 16, 2019
Messages
23
Reaction score
0
Hi friends. I have a problem. I need speed of 25 m/s for lounchrod but my design speed is 32 m/s. If I increase mass, altitude is falling. How can reduce the lounchrod speed?
Thanks friends:(
 

Attachments

turkkusuroket

Member
Joined
Dec 16, 2019
Messages
23
Reaction score
0
Shorten the launch rod.
Thanks friend, i solved the problem. I have one more question. Apogee volue is 3032 m (in simulation screen) but apogee volue is 4700 m (on the screen with the design). Why are these values different?
 

Voyager1

Well-Known Member
TRF Supporter
Joined
Oct 23, 2015
Messages
610
Reaction score
202
Location
ACT, Australia
Thanks friend, i solved the problem. I have one more question. Apogee volue is 3032 m (in simulation screen) but apogee volue is 4700 m (on the screen with the design). Why are these values different?
Make sure you have the correct motor selected in the Flight Configuration dropdown list on the top right side of the main design screen.

Edit: See your other thread.
 
Last edited:
Top