Quantcast

High Power Casings, Electronics, and Recovery Components

The Rocketry Forum

Help Support The Rocketry Forum:

Kip_Daugirdas

Well-Known Member
Joined
Jun 2, 2013
Messages
309
Reaction score
53
I don't fly this stuff anymore so it's time to sell. I've tacked on a price but please feel free to send an offer too!

I will not ship outside the lower 48, please do not ask. Everything will go FedEx ground (buyer pays). Motors are available for pickup in Chicago area (Wilmette). Motors can be shipped Hazmat. Must send pic of TRA/NAR membership card showing Cert Lvl.

Aerotech 29mm
2x RMS 29/180 casings - $23 each
2x RMS 29/240 casings - $40 each 1 sold, 1 pending
2x rear closures - $12 each 1x Pending
2x fwd closures (open) - $15 each 1x Pending
2x fwd closures (closed) $15 each 1x Pending

H180W are loaded in each 29/240 casings! $12/each! Sold
SEE PIC in thread below.

Single use 29/24mm motors (AT)

2x G55-15W - $20 each
Note this motor is no longer produced by Aerotech and thus not certified. I removed the ejection charge and added masking tape centering rings and a thrust ring for a 29mm flight. These can easily be removed for a 24mm motor mount.

2x G40 or G80, not sure of the delay. The ejection charge has been removed. They flew on an air-start rocket but did not light so the nozzle end has some combustion products on it from the central motor.
$7/each!

ImageUploadedByRocketry Forum1465831779.570897.jpg

Aerotech 38mm:
1x RMS 38/720 full set $50 Sold
1x fwd closure $20
Both closures are open
ImageUploadedByRocketry Forum1465832283.515971.jpg

Aerotech 54mm:
1x RMS 54/852 casing $45
1x RMS 54/1280 casing $60
1x RMS 54/1706 casing (never flown) $85 Sold
1x rear closure $25 Sold
1x fwd closure (open) $25 Sold
1x extended fwd closure (open) $35 Sold

ImageUploadedByRocketry Forum1465832267.310022.jpg

Pro38:
1G case (new) $17 Sold
2G case (new) $23 Sold
3G case $25 Sold
4G case $30 Sold
2x 6G case $40 each Sold
ProDAT $10 Sold
ImageUploadedByRocketry Forum1465834991.099427.jpg

Pro54:
2G case $30 Sold
3G case $40 Sold
4G case $50 Sold
5G case (new), you get another 5G case for free that had a forward closure CATO but still looks good to fly. $65 Sold
6GXL case flown once $80 Sold
Rear closure $20 Sold
ProDAT $15
ImageUploadedByRocketry Forum1465835132.504690.jpg

PML Copilot made by missile works: $15 Sold
PML Accufire timer made by G-Wiz: $15 Pending
Beepers are free (if you order something!!)! 2 Sold, 1 Pending (transbeep)
ImageUploadedByRocketry Forum1465835156.474938.jpg

Combo!
Missile works RRC2X and a PML Copilot Altimeter - already mounted just throw into your level 3 rocket!
$50 Sold
ImageUploadedByRocketry Forum1465835195.090612.jpg
 

Attachments

Last edited:

codysmith

Well-Known Member
Joined
Oct 18, 2013
Messages
1,189
Reaction score
1
I'll take one of the beepers if you don't mind. My school has been looking to get something like them for the tech ed class/rocketry unit.
 

dhbarr

Amateur Professional
Joined
Jan 30, 2016
Messages
7,008
Reaction score
1,458
Centering rings have them all for $25!
5x 3.9 PML BP 3/16" thick
5x 3.9 PML CPB 3/16" thick
2x 3.9 PML CPB 1/8" thick
1x 3.9 to 2.1 ring PML 1/2" thick
1x 3.9 CPB PML1/2" thick
2x 3.9 to 3 CCR PML 1/2" thick
2x 3.9 to 2.1 CCR PML 3/16" thick
2x 3.9 to 2.1 CR PML 3/16" thick
1x Hawk Mountain 3.9 CPB 1/2" thick
5x 3" to 1.5" CR PML 3/16" thick
2x 3" to 1.5 CCR PML 3/16" thick
7x 1.5" to 1" CR PML 3/16" thick
1x two 29mm cluster to 3.9" CR PML 3/16" thick
!
Heck of a deal on the stack-o-cr's; pm sent.
 
Last edited:

Kip_Daugirdas

Well-Known Member
Joined
Jun 2, 2013
Messages
309
Reaction score
53
Parachutes:
Most have been used, these have no burn holes or damage just some soot marks.
ImageUploadedByRocketry Forum1465844665.484445.jpg
2x 24" giant leap chutes single piece
2x 18" giant leap chutes single piece
$18 for all. Pending

ImageUploadedByRocketry Forum1465844758.261338.jpg

3x 36" PML chutes $16/each, 1 red/white, 2 purple/yellow Sold
1x 30" PML chute $14 blue/orange Sold
1x 48" PML chute $15 red/white Sold
1x 18" PML chute $9 purple/yellow Sold

ImageUploadedByRocketry Forum1465844784.370559.jpgImageUploadedByRocketry Forum1465844798.222809.jpg
Rocketman RRC12 no damage other than 1/2" tear at the peak of the canopy shown in pic $75
 
Last edited:

amellrotts

Active Member
Joined
Feb 5, 2016
Messages
43
Reaction score
0
PM sent on 2x RMS 29/240 casings - $40 each
H180W are loaded in each 29/240 casings! $12/each!
1x RMS 38/720 full set $50
2x 24" giant leap chutes single piece
2x 18" giant leap chutes single piece
$18 for all.
1x 48" PML chute $15 red/white
 

noffie79

Well-Known Member
Joined
Jul 25, 2015
Messages
1,340
Reaction score
13
Interested in CTI Pro 54 3 grain case. PM sent
 

Kip_Daugirdas

Well-Known Member
Joined
Jun 2, 2013
Messages
309
Reaction score
53
All those who have responded by PM.

I have all of your information in my inbox. I will hold your items, I am traveling from Chicago to SLC tonight. Some of your orders will ship USPS to save you on shipping. Orders that do not fit in flat rate boxes we will do FedEx ground. I will update your shipping costs tomorrow.

Thanks and we will be in touch tomorrow!
-Kip
 

CzTeacherMan

Well-Known Member
Joined
Aug 8, 2014
Messages
2,982
Reaction score
169
All those who have responded by PM.

I have all of your information in my inbox. I will hold your items, I am traveling from Chicago to SLC tonight. Some of your orders will ship USPS to save you on shipping. Orders that do not fit in flat rate boxes we will do FedEx ground. I will update your shipping costs tomorrow.

Thanks and we will be in touch tomorrow!
-Kip
Money sent. Thanks!
 

BDB

Absent Minded Professor
Joined
Aug 22, 2015
Messages
2,184
Reaction score
417
PM for the Pro54 6GXL
 

Kip_Daugirdas

Well-Known Member
Joined
Jun 2, 2013
Messages
309
Reaction score
53
To All,

I am working right now during lunch to put together a spreadsheet of everyone and what they purchased including your ZIP code/address to calculate shipping. If you have not sent me your Zip please do so. There are a couple dozen orders I have to work through and some folks I still have to respond to. I will be contacting everyone that has PMed me individually this evening after work.

Thanks for being patient!
-Kip
 

noffie79

Well-Known Member
Joined
Jul 25, 2015
Messages
1,340
Reaction score
13
Thanks Kip. I hope you got my PM with zip for the 54mm 3 grain CTI case.
 

Kip_Daugirdas

Well-Known Member
Joined
Jun 2, 2013
Messages
309
Reaction score
53
Hey everyone, I think I have touched base with everybody. If I haven't contacted you please let me know. Those of you who have paid will have your boxes packed tonight and shipped tomorrow!

There's still some stuff available!

-Kip
 

Kip_Daugirdas

Well-Known Member
Joined
Jun 2, 2013
Messages
309
Reaction score
53
Updated quantities! There's still some stuff for sale. Take a look!
-Kip

I don't fly this stuff anymore so it's time to sell. I've tacked on a price but please feel free to send an offer too!

I will not ship outside the lower 48, please do not ask. Everything will go FedEx ground (buyer pays). Motors are available for pickup in Chicago area (Wilmette). Motors can be shipped Hazmat. Must send pic of TRA/NAR membership card showing Cert Lvl.

Aerotech 29mm
2x RMS 29/180 casings - $23 each
2x RMS 29/240 casings - $40 each 1 sold, 1 pending
2x rear closures - $12 each 1x Pending
2x fwd closures (open) - $15 each 1x Pending
2x fwd closures (closed) $15 each 1x Pending

H180W are loaded in each 29/240 casings! $12/each! Sold
SEE PIC in thread below.

Single use 29/24mm motors (AT)

2x G55-15W - $20 each
Note this motor is no longer produced by Aerotech and thus not certified. I removed the ejection charge and added masking tape centering rings and a thrust ring for a 29mm flight. These can easily be removed for a 24mm motor mount.

2x G40 or G80, not sure of the delay. The ejection charge has been removed. They flew on an air-start rocket but did not light so the nozzle end has some combustion products on it from the central motor.
$7/each!

View attachment 293927

Aerotech 38mm:
1x RMS 38/720 full set $50 Sold
1x fwd closure $20
Both closures are open
View attachment 293929

Aerotech 54mm:
1x RMS 54/852 casing $45
1x RMS 54/1280 casing $60
1x RMS 54/1706 casing (never flown) $85 Sold
1x rear closure $25 Sold
1x fwd closure (open) $25 Sold
1x extended fwd closure (open) $35 Sold

View attachment 293928

Pro38:
1G case (new) $17 Sold
2G case (new) $23 Sold
3G case $25 Sold
4G case $30 Sold
2x 6G case $40 each Sold
ProDAT $10 Sold
View attachment 293933

Pro54:
2G case $30 Sold
3G case $40 Sold
4G case $50 Sold
5G case (new), you get another 5G case for free that had a forward closure CATO but still looks good to fly. $65 Sold
6GXL case flown once $80 Sold
Rear closure $20 Sold
ProDAT $15
View attachment 293934

PML Copilot made by missile works: $15 Sold
PML Accufire timer made by G-Wiz: $15
Beepers are free (if you order something!!)! 2 Sold, 1 Pending (transbeep)
View attachment 293935

Combo!
Missile works RRC2X and a PML Copilot Altimeter - already mounted just throw into your level 3 rocket!
$50 Pending
View attachment 293936
 

CzTeacherMan

Well-Known Member
Joined
Aug 8, 2014
Messages
2,982
Reaction score
169
Received mine today. Well packed, good condition as described. Thanks!
 

Kip_Daugirdas

Well-Known Member
Joined
Jun 2, 2013
Messages
309
Reaction score
53
Received mine today. Well packed, good condition as described. Thanks!
Have fun with it!

FYI:
I sent out tracking info for everyone's package that has shipped so far yesterday. It was PMed through TRF. My sent TRF mail is not showing many of those messages. If you did not receive tracking info please email me directly using the Paypal email I provided you.

More packages will go out tonight and I will send tracking info for those shipments.

Thanks everyone!
 

pnobile

Top Flight Recovery LLC
Joined
Nov 15, 2011
Messages
655
Reaction score
26
Received my stuff today, all good!

Thanks

Preston
 

noffie79

Well-Known Member
Joined
Jul 25, 2015
Messages
1,340
Reaction score
13
Mine came today. Great packing. Perfect, thanks!
 

BDB

Absent Minded Professor
Joined
Aug 22, 2015
Messages
2,184
Reaction score
417
I received the Pro54 6GXL a couple days ago. It looks great. Now I just need to man up and build the rocket that it is intended for, the RW Mongoose 54. Thanks.
 
Top